What is the soft start mode of diesel generator set motor? The soft starter in series between the power supply and the controlled motor is used to control the conduction angle of the internal thyristor, so as to gradually increase the input voltage of the motor from zero to the end of starting, and give the full voltage of the motor, that is, soft starting. In the process of soft starting, the starting torque and speed of the motor gradually increase. Soft start generally has the following starting modes.

柴油發電機組啟動方式如下：

The starting mode of diesel generator set is as follows:

(1)柴油發電機組斜坡升壓軟起動：這種起動方式簡單，沒有電流閉環控制，只調節晶閘管的導通角，使其與時間有一定的功能關系。缺點是由于電流不受限制，在電機起動過程中，有時需要產生大的脈沖電流來損壞晶閘管，對電網有很大的影響，在實際中很少使用。

(1) Diesel generator set ramp boost soft start: this starting method is simple, there is no current closed-loop control, only adjust the conduction angle of the thyristor, so that it has a certain functional relationship with time. The disadvantage is that due to the unlimited current, it is sometimes necessary to generate large pulse current to damage the thyristor during the motor starting process, which has a great impact on the power grid and is rarely used in practice.

(2)柴油發電機組斜坡恒流軟起動：這種起動方式在電動機起動初期逐漸增加，當電流達到預定值時保持不變，直到起動完成為止。在起動過程中，電流上升和變化的速度可以根據電機負荷來調節和設定。

(2) Diesel generator set ramp constant current soft start: this starting method gradually increases in the initial stage of motor start, and remains unchanged when the current reaches the predetermined value until the start is completed. During the starting process, the speed of current rise and change can be adjusted and set according to the motor load.

如果電流上升速率大，起動轉矩大，起動時間短，這種起動方式是使用廣泛的起動方式，尤其適用于風扇和泵負荷起動。

If the current rise rate is large, the starting torque is large, and the starting time is short, this starting method is widely used, especially for fan and pump load starting.

(3)柴油發電機組步啟動：啟動，即在短時間內，起動電流可以快速到達設定值，即步進起動。通過調整起動電流的設定值，可以達到快速啟動的效果。

(3) Step start of diesel generator set: start, that is, in a short time, the starting current can quickly reach the set value, that is, step start. By adjusting the set value of starting current, the effect of fast starting can be achieved.

(4)柴油發電機組脈沖沖擊起動：在起動階段，晶閘管可開啟一段很短的時間，過一段時間后，在較大電流下回落，然后根據原設定值線性上升，以恒流起動。這種起動方式在一般負載中使用較少，適用于重負荷，需要克服較大的靜態摩擦。

(4) Pulse impulse starting of diesel generator set: in the starting stage, the thyristor can be opened for a very short time. After a period of time, it will fall back under large current, and then rise linearly according to the original set value to start with constant current. This starting method is less used in general loads, suitable for heavy loads, and needs to overcome large static friction.

以上就是瓦斯發電機組為大家介紹的內容，感謝您在百忙之中查看我公司的信息內容，如果您想要了解的更多，歡迎您來電進行咨詢!http://www.esonled.cn

The above is what the gas generator set introduced to you. Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation! http://www.esonled.cn