1、生物質直接燃燒發電
1. Direct combustion of biomass for power generation
生物質直接燃燒發電是指把生物質原料送入適合生物質燃燒的特定鍋爐中直接燃燒，產生蒸汽，帶動蒸汽輪機及發電機發電。已開發應用的生物質鍋爐種類較多，如木材鍋爐、甘蔗渣鍋爐、稻殼鍋爐、秸稈鍋爐等。生物質直接燃燒發電的關鍵技術包括原料預處理，生物質鍋爐防腐，提高生物質鍋爐的多種原料適用性及燃燒效率、蒸汽輪機效率等技術。
Biomass direct combustion power generation refers to the direct combustion of biomass raw materials into a specific boiler suitable for biomass combustion, generating steam to drive steam turbines and generators to generate electricity. There are many types of biomass boilers that have been developed and applied, such as wood boilers, bagasse boilers, rice husk boilers, straw boilers, etc. The key technologies for biomass direct combustion power generation include raw material pretreatment, anti-corrosion of biomass boilers, improving the applicability and combustion efficiency of various raw materials for biomass boilers, and steam turbine efficiency.
生物質直接燃燒發電技術中的生物質燃燒方式包括固定床燃燒或流化床燃燒等方式。固定床燃燒對生物質原料的預處理要求較低，生物質經過簡單處理甚至無須處理就可投入爐排爐內燃燒。流化床燃燒要求將大塊的生物質原料預先粉碎至易于流化的粒度，其燃燒效率和強度都比固定床高。
The biomass combustion methods in biomass direct combustion power generation technology include fixed bed combustion or fluidized bed combustion. Fixed bed combustion requires low pre-treatment requirements for biomass raw materials, and biomass can be put into a grate furnace for combustion after simple treatment or even without treatment. Fluidized bed combustion requires pre crushing large biomass raw materials to a particle size that is easy to fluidize, with higher combustion efficiency and intensity than fixed beds.
另外，由于我國的生物質種類多，成分復雜，收集運輸困難，而且主要的農業廢棄物受到農業生產和季節性的影響不能保證全年供應，所以與燃煤鍋爐對燃料單一性的要求不同，生物質鍋爐要求能適應多種生物質原料，以保證燃料供應的穩定性。
In addition, due to the large variety and complex composition of biomass in China, collection and transportation difficulties, and the impact of agricultural production and seasonality on the main agricultural wastes, which cannot ensure the annual supply, unlike coal-fired boilers, which require fuel uniformity, biomass boilers are required to be able to adapt to a variety of biomass raw materials to ensure the stability of fuel supply.
我國的生物質鍋爐和小型蒸汽輪機技術已基本成熟，但設備規模較小，參數較低，與進口設備相比效率較低。生物質直接燃燒發電技術比較成熟，在大規模生產條件下具有較高的效率。該技術在我國應用較少，因為它要求生物質資源集中，數量巨大，如果大規模收集或運輸生物質，將提高原料成本，因此該技術比較適于現代化大農場或大型加工廠的廢物處理。

The technology of biomass boilers and small steam turbines in China has been basically mature, but the equipment scale is small, the parameters are low, and the efficiency is lower compared to imported equipment. Biomass direct combustion power generation technology is relatively mature and has high efficiency under large-scale production conditions. This technology is rarely used in China because it requires concentrated biomass resources and a large amount. If biomass is collected or transported on a large scale, it will increase the cost of raw materials. Therefore, this technology is more suitable for waste treatment in modern large farms or large processing plants.
2、生物質氣化發電
2. Biomass gasification for power generation
生物質氣化發電是指生物質在氣化爐中氣化生成可燃?xì)怏w，經過凈化后驅動內燃機或小型燃?xì)廨啓C發電。氣化爐應對不同種類的生物質原料有較強的適應性。內燃機一般由柴油機或天然氣機改造而成，以適應生物質燃?xì)鉄嶂递^低的要求;燃?xì)廨啓C要求容量小，適于燃燒高雜質、低熱值的生物質燃?xì)狻?br /> Biomass gasification power generation refers to the gasification of biomass in a gasifier to generate combustible gas, which is purified to drive an internal combustion engine or small gas turbine for power generation. Gasifiers have strong adaptability to different types of biomass feedstock. Internal combustion engines are generally modified from diesel or natural gas engines to meet the requirements of low calorific value of biomass gas; The gas turbine requires a small capacity and is suitable for burning biomass gas with high impurities and low calorific value.
生物質氣化發電包括小型氣化發電和中型氣化發電2種模式：小型氣化發電采用簡單的氣化—內燃機發電工藝，發電效率一般在14%-20%，規模一般小于3MW。中型氣化發電除了采用氣化—內燃機(或燃?xì)廨啓C)發電工藝外，同時增加余熱回收和發電系統，氣化發電系統的總效率可達到25%-35%。
Biomass gasification power generation includes two modes: small-scale gasification power generation and medium-sized gasification power generation: small-scale gasification power generation uses a simple gasification internal combustion engine power generation process, with a power generation efficiency of generally 14% - 20%, and a scale of generally less than 3MW. In addition to adopting the gasification internal combustion engine (or gas turbine) power generation process, medium-sized gasification power generation also adds a waste heat recovery and power generation system. The total efficiency of the gasification power generation system can reach 25% - 35%.
另外，大規模的氣化—燃?xì)廨啓C聯合循環發電系統作為的生物質氣化發電技術，能耗比常規系統低，總體效率高于40%，但關鍵技術仍未成熟，尚處在示范和研究階段。
In addition, as an advanced biomass gasification power generation technology, large-scale gasification gas turbine combined cycle power generation systems have lower energy consumption and overall efficiency higher than 40% compared to conventional systems. However, key technologies are still immature and are still in the demonstration and research stage.